top of page
PMC 6-2 (Pair)
**We consider these high-end studio monitors. Do reach out to us if you want to arrange a consultation before purchase.
 
The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.

This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.

The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.

A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.
  • Active 3-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 33Hz - 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 109dB @1m (Half space value calculated as +3dB from full space measurement.
    Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz)
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom
  • Ceiling-mount yoke allows suspension in multi-channel or immersive systems
 
Product Link: https://www.pmc-speakers.com/studio/pmc-6-2
 

PMC 6-2 (Pair)

$17,222.00Price
Estimated waiting time: 3 months

  • - Type: Active 3-way nearfield reference monitor with ATL™ bass loading

    - Drive Unit Complement: LF 2 x PMC 150mm (6”) studio 6 drivers, MF PMC 55mm (2”) soft dome mid-range, HF PMC 27mm (1”) soft dome tweeter

    - Effective ATL™ Length: 2m (6.6ft)

    - Frequency Response: 33Hz - 25kHz (- 3dB) (@1m full space, on-axis)

    - Sensitivity:+4dBu input signal = 98dB SPL @ 1m

    - Max continuous SPL: 109dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

    - Max Peak SPL: 121dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

    - Directivity: H +/-50 degreesV +60/-40 degrees (-6dB off axis @10kHz)Input

    - XLR switchable between analogue & digital AES3

    - Analogue input: +20/+24dBu max. input level (selectable)- 22K ohm input impedance

    - Digital input: 16/24-bit AES3 signal, left, right or left + right- 18 - 192kHz Sample Rate- 110 ohm input impedance

    - Expansion card slot: For future connectivity upgrades

    - Output: XLR digital AES3 (fixed 24-bit @ 96kHz)

    - Network: RJ45 for use with PMC SoundAlign web interface

    - Features: Level Trim (+/-10dB), High-pass filter (20 - 200Hz, 12dB/Oct), Delay (0 - 30mS), Phase (normal or inverted)LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)

    - Parametric EQ: (5 bands, 20Hz - 20kHz, +/- 10dB)

    - User presets (3 + factory defaults)

    - Latency: 2.4mS

    - Amplifier power per channel: LF 2 x 400WrmsMF 1 x 400WrmsHF 1 x 400Wrms

    - Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)

    - Power consumption (idle): 50W

    - Power consumption (max): 1500W

    - Cabinet dimensions: H 400mm (15.7”)W 430mm (16.9”)D 372mm (14.6”)

    - Weight: 21.3kg (47lbs) each

  • Prices are inclusive of Singapore GST.

    Contact us directly for international purchases via email at eugene@theaudiotonic.com

Related Products