top of page
PMC 8-2 (Pair)
**We consider these high-end studio monitors. Do reach out to us if you want to arrange a consultation before purchase.
 
As with any PMC loudspeaker, thanks to its super-consistent dispersion and tonal balance, the PMC8-2 may be simply and seamlessly combined with smaller PMC speakers to create larger multi-channel or immersive systems.

The twin bass drivers are partnered with the same PMC55 mid-range tweeter, DSP system and four channels of 400W Class-D amplification used in the PMC6-2. Again, the speaker is configurable directly via the rear panel or using the browser-based SoundAlign™ software from a computer or tablet.

Together with the precisely tuned ATL™ cabinet and hexagonal Laminair™ vents, the PMC8-2 delivers phenomenal performance that approaches that of our Main reference monitors, with smooth and consistent bass response down to 25Hz, a revealing mid-range and wide, stable sound-staging. As with the rest of the range, the PMC8-2’s superb definition, fidelity, dynamics and bass accuracy allow mix decisions to be made quickly with complete confidence, and with no listening fatigue even after long sessions.

PMC8-2s can be upgraded through the addition of a PMC8-2 SUB to create an XBD system, enhancing the system’s bass headroom by 6dB. Dedicated short and taller floor-stands are available for the PMC8-2 and PMC8-2 XBD systems which position them on the ideal listening axis.
  • Active 3-way nearfield reference monitor with ATL™ bass loading
  • Frequency response: 25Hz - 25kHz (- 3dB @1m full space, on-axis)
  • Max. cont. SPL: 113dB @1m (half space value calculated as +3dB from full space measurement.
    Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
  • State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
  • Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
  • Digital ‘through’ output (AES3 24-bit 96kHz
  • SoundAlign™ network control interface for single or group EQ & settings
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
  • PMC8-2 + PMC8-2 SUB creates PMC8-2 XBD, with up to 6dB of additional headroom
  • Optional dedicated floor stands for PMC8-2 (40”) and PMC8-2 XBD (19”)
 
Product Link: https://www.pmc-speakers.com/studio/pmc-8-2

PMC 8-2 (Pair)

$26,378.00Price
Estimated waiting time: 3 months

  • - Type: Active 3-way nearfield reference monitor with ATL™ bass loading

    - Drive Unit Complement: LF 2 x PMC 200mm (8”) studio 8 drivers, MF PMC 55mm (2”) soft dome mid-range, HF PMC 27mm (1”) soft dome tweeter

    - Effective ATL™ Length: 3m (9.8ft)

    - Frequency Response: 25Hz - 25kHz (- 3dB) (@1m full space, on-axis)

    - Sensitivity: +4dBu input signal = 98dB SPL @ 1m

    - Max continuous SPL: 113dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

    - Max Peak SPL: 125dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

    - Directivity: H+/-45 degreesV+/-50 degrees (-6dB off axis @10kHz)

    - Input: XLR switchable between analogue & digital AES3

    - Analogue input: +20/+24dBu max. input level (selectable)- 22K ohm input impedance

    - Digital input: 16/24-bit AES3 signal, left, right or left + right- 18 - 192kHz Sample Rate- 110 ohm input impedance

    - Expansion card slot: For future connectivity upgrades

    - Output: XLR digital AES3 (fixed 24-bit @ 96kHz)

    - Network: RJ45 for use with PMC SoundAlign web interface

    - Features: Level Trim (+/-10dB)High-pass filter (20 - 200Hz, 12dB/Oct)Delay (0 - 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)

    - User presets (3 + factory defaults)

    - Latency: 2.4mS

    - Amplifier power per channel: LF 2 x 400WrmsMF 1 x 400WrmsHF 1 x 400Wrms

    - Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)

    - Power consumption (idle): 50W

    - Power consumption (max): 1500W

    - Cabinet dimensions: H 534mm (21”)W 551mm (21.7”)D 440mm (17.3”)

    - Weight: 39kg (86lbs) each

  • Prices are inclusive of Singapore GST.

    Contact us directly for international purchases via email at eugene@theaudiotonic.com

Related Products